uart_set_baudrate should return actual rate set even in case of out of range parameters
This commit is contained in:
parent
4cc1efa01a
commit
a98136628c
@ -16,6 +16,7 @@ enum {
|
||||
PICO_ERROR_TIMEOUT = -1,
|
||||
PICO_ERROR_GENERIC = -2,
|
||||
PICO_ERROR_NO_DATA = -3,
|
||||
PICO_ERROR_OUT_OF_RANGE = -4,
|
||||
};
|
||||
|
||||
#endif
|
@ -75,23 +75,25 @@ uint uart_set_baudrate(uart_inst_t *uart, uint baudrate) {
|
||||
uint32_t baud_rate_div = (8 * clock_get_hz(clk_peri) / baudrate);
|
||||
uint32_t baud_ibrd = baud_rate_div >> 7;
|
||||
uint32_t baud_fbrd = ((baud_rate_div & 0x7f) + 1) / 2;
|
||||
invalid_params_if(UART, (baud_ibrd > 65535) || (baud_ibrd == 0));
|
||||
|
||||
if (baud_ibrd == 0) {
|
||||
baud_ibrd = 1;
|
||||
baud_fbrd = 0;
|
||||
} else if (baud_ibrd >= 65535) {
|
||||
baud_ibrd = 65535;
|
||||
baud_fbrd = 0;
|
||||
}
|
||||
|
||||
// Load PL011's baud divisor registers
|
||||
uart_get_hw(uart)->ibrd = baud_ibrd;
|
||||
if (baud_ibrd == 65535) {
|
||||
uart_get_hw(uart)->fbrd = 0;
|
||||
} else {
|
||||
uart_get_hw(uart)->fbrd = baud_fbrd;
|
||||
}
|
||||
uart_get_hw(uart)->fbrd = baud_fbrd;
|
||||
|
||||
// PL011 needs a (dummy) line control register write to latch in the
|
||||
// divisors. We don't want to actually change LCR contents here.
|
||||
hw_set_bits(&uart_get_hw(uart)->lcr_h, 0);
|
||||
|
||||
// See datasheet
|
||||
uint baud = (4 * clock_get_hz(clk_peri)) / (64 * baud_ibrd + baud_fbrd);
|
||||
return baud;
|
||||
return (4 * clock_get_hz(clk_peri)) / (64 * baud_ibrd + baud_fbrd);
|
||||
}
|
||||
/// \end::uart_set_baudrate[]
|
||||
|
||||
|
Loading…
Reference in New Issue
Block a user