abawo/pico-sdk
3
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Add explanatory note on 7-bit I2C addresses (#520)

Browse Source
This commit is contained in:
Matias Silva 2021-07-19 12:02:19 +01:00 committed by GitHub
parent ae6e574f53
commit 7e90980118
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 10 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

18
src/rp2_common/hardware_i2c/include/hardware/i2c.h
View File

@ -26,10 +26,12 @@ extern "C" {
* I2C Controller API
*
* The I2C bus is a two-wire serial interface, consisting of a serial data line SDA and a serial clock SCL. These wires carry
* information between the devices connected to the bus. Each device is recognized by a unique address and can operate as
* information between the devices connected to the bus. Each device is recognized by a unique 7-bit address and can operate as
* either a “transmitter” or “receiver”, depending on the function of the device. Devices can also be considered as masters or
* slaves when performing data transfers. A master is a device that initiates a data transfer on the bus and generates the
* clock signals to permit that transfer. At that time, any device addressed is considered a slave.
* clock signals to permit that transfer. The first byte in the data transfer always contains the 7-bit address and
* a read/write bit in the LSB position. This API takes care of toggling the read/write bit. After this, any device addressed
* is considered a slave.
*
* This API allows the controller to be set up as a master or a slave using the \ref i2c_set_slave_mode function.
*
@ -154,7 +156,7 @@ static inline i2c_hw_t *i2c_get_hw(i2c_inst_t *i2c) {
* \ingroup hardware_i2c
*
* \param i2c Either \ref i2c0 or \ref i2c1
* \param addr Address of device to write to
* \param addr 7-bit address of device to write to
* \param src Pointer to data to send
* \param len Length of data in bytes to send
* \param nostop If true, master retains control of the bus at the end of the transfer (no Stop is issued),
@ -171,7 +173,7 @@ int i2c_write_blocking_until(i2c_inst_t *i2c, uint8_t addr, const uint8_t *src,
* \ingroup hardware_i2c
*
* \param i2c Either \ref i2c0 or \ref i2c1
* \param addr Address of device to read from
* \param addr 7-bit address of device to read from
* \param dst Pointer to buffer to receive data
* \param len Length of data in bytes to receive
* \param nostop If true, master retains control of the bus at the end of the transfer (no Stop is issued),
@ -185,7 +187,7 @@ int i2c_read_blocking_until(i2c_inst_t *i2c, uint8_t addr, uint8_t *dst, size_t
* \ingroup hardware_i2c
*
* \param i2c Either \ref i2c0 or \ref i2c1
* \param addr Address of device to write to
* \param addr 7-bit address of device to write to
* \param src Pointer to data to send
* \param len Length of data in bytes to send
* \param nostop If true, master retains control of the bus at the end of the transfer (no Stop is issued),
@ -207,7 +209,7 @@ int i2c_write_timeout_per_char_us(i2c_inst_t *i2c, uint8_t addr, const uint8_t *
* \ingroup hardware_i2c
*
* \param i2c Either \ref i2c0 or \ref i2c1
* \param addr Address of device to read from
* \param addr 7-bit address of device to read from
* \param dst Pointer to buffer to receive data
* \param len Length of data in bytes to receive
* \param nostop If true, master retains control of the bus at the end of the transfer (no Stop is issued),
@ -226,7 +228,7 @@ int i2c_read_timeout_per_char_us(i2c_inst_t *i2c, uint8_t addr, uint8_t *dst, si
* \ingroup hardware_i2c
*
* \param i2c Either \ref i2c0 or \ref i2c1
* \param addr Address of device to write to
* \param addr 7-bit address of device to write to
* \param src Pointer to data to send
* \param len Length of data in bytes to send
* \param nostop If true, master retains control of the bus at the end of the transfer (no Stop is issued),
@ -239,7 +241,7 @@ int i2c_write_blocking(i2c_inst_t *i2c, uint8_t addr, const uint8_t *src, size_t
* \ingroup hardware_i2c
*
* \param i2c Either \ref i2c0 or \ref i2c1
* \param addr Address of device to read from
* \param addr 7-bit address of device to read from
* \param dst Pointer to buffer to receive data
* \param len Length of data in bytes to receive
* \param nostop If true, master retains control of the bus at the end of the transfer (no Stop is issued),