Graham Sanderson
0d2591e1f1
Pad all but last sector in flash binary to write whole of sector ( #800 )
2022-05-10 13:03:44 -05:00
Graham Sanderson
81bdcb6681
print build type during CMake config; remove spurious call to pico_is_toplevel_project() ( #818 )
2022-05-10 13:00:22 -05:00
Graham Sanderson
9c616da1e5
fix bug in pico_float_test ( #817 )
2022-05-10 12:58:55 -05:00
eskimo-software
f260477802
Adapt assembler syntax to eliminate Clang errors. (LLVM 14.0.0) ( #798 )
...
Co-authored-by: jeremyd <>
2022-05-09 15:11:59 -05:00
Graham Sanderson
e1c5fd34e4
PLL setup check bug ( #796 ) ( #806 )
2022-05-09 14:52:38 -05:00
Andrew Scheller
5d422deed1
Add extra info about address_range defined values ( #652 )
2022-05-04 16:36:21 -05:00
Eunkyoung Kim
0c501c246a
Add wiznet_w5100s_evb_pico support ( #666 )
2022-05-04 16:35:06 -05:00
Graham Sanderson
259da19660
Include structs/iobank0.h from hardware/gpio.h ( #733 ) ( #807 )
2022-05-04 16:34:11 -05:00
ZodiusInfuser
5325008956
Added board definition for upcoming Pimoroni motor driver ( #795 )
2022-05-04 16:21:30 -05:00
Andrew Scheller
510ca47c92
Additional PWM validation and small tidy-up ( #801 )
...
See #768 for discussion / inspiration
2022-05-04 15:29:26 -05:00
ZodiusInfuser
d5121dc880
Removed unnecessary ifdefs from Pimoroni boards ( #802 )
...
* Removed unnecessary ifdefs from Pim boards
* Re-ordered some pins
2022-05-04 15:26:55 -05:00
Andrew Scheller
3c450011da
Additional param-validation for PIO ( #805 )
...
The RP2040 datasheet says "If INT is 0, FRAC must also be 0."
2022-05-04 15:25:43 -05:00
Ryan Hartlage
6149b9e4ec
Add board definition for Seeed Xiao RP2040 ( #691 )
...
* Add board definition for Seeed Xiao RP2040
https://www.seeedstudio.com/XIAO-RP2040-v1-0-p-5026.html
https://wiki.seeedstudio.com/XIAO-RP2040/
2022-05-03 12:40:40 -05:00
bruelltuete
8554fc4ea1
Add is_at_the_end_of_time() method ( #784 )
2022-05-03 11:55:01 -05:00
ZodiusInfuser
01290c4cb3
Added int_frac function for configuring PWM ( #768 )
2022-05-03 11:54:46 -05:00
Andrew Scheller
8d43364cfb
Small typos ( #776 )
2022-05-03 11:47:48 -05:00
Andrew Scheller
1c9f72ba1c
Small edits to the Doxygen mainpage and update the RPi logo ( #778 )
2022-05-03 11:47:18 -05:00
bruelltuete
76c1830aeb
Add gpio_deinit ( #793 )
2022-05-03 11:46:27 -05:00
Andrew Scheller
c66a2c1c3b
Remove implicit grouping for PIO defines ( #779 )
2022-05-03 11:46:10 -05:00
Akiyuki Okayasu
e4a2aa7262
Fix typo in binary_info description ( #788 )
2022-05-03 11:43:42 -05:00
Andrew Scheller
fc86203f49
comment typo ( #794 )
2022-05-03 11:41:10 -05:00
Andrew Scheller
6619a2d329
Typo ( #799 )
...
Remove superfluous apostrophes in Doxygen comments
2022-05-03 11:34:46 -05:00
Graham Sanderson
5a427fbf1f
irq_add_shared_handler assertion fix #724 ( #747 )
2022-04-29 14:34:20 -05:00
ZodiusInfuser
bb5a2a3906
Added definition for Badger RP2040 board ( #735 )
2022-04-04 16:10:32 -05:00
Graham Sanderson
8291f1013a
add #ifdef guards to vgaboard.h to allow user overrides ( #746 )
2022-04-04 16:08:53 -05:00
Kai
e90f831756
add board definition of eetree gamekit rp2040 ( #732 )
2022-04-04 16:08:30 -05:00
Graham Sanderson
541f93541c
improve comment ( #658 )
2022-04-04 16:08:12 -05:00
Andrew Scheller
17d53af105
Allow 252-byte binaries to be checksummed ( #764 )
...
Fixes #740
2022-04-04 15:46:34 -05:00
Doug Rabson
1896b1491b
fix __ctzdi2 for values with non-zero low 32 bits ( fixes #765 ) ( #766 )
2022-04-04 15:45:01 -05:00
ZodiusInfuser
3d45276423
Added board definition for upcoming Pimoroni servo driver ( #769 )
2022-04-04 15:31:52 -05:00
Andrew Scheller
d35083b3f7
Fix typo in SIO register description ( #770 )
2022-04-04 15:30:13 -05:00
Will Eccles
38b26b5d65
pico_sdk_import: don't recurse git submodules ( #772 )
...
When cloning the pico-sdk repo manually, one normally would do `git
submodule update --init`, which is non-recursive. However, when cloning
automatically, CMake will recursively update submodules by default.
Updating all of tiny-usb's submodules takes an extremely long time.
Luckily, CMake 3.17 added an option we can specify for FetchContent to
tell it not to recursively update submodules. On older CMake versions,
the flag is not used. For those with a new enough version of CMake, this
will significantly speed up SDK cloning.
Fixes #771 .
2022-04-04 15:29:33 -05:00
Brian Murphy
d54104a1e5
fix when PICO_NO_BINARY_INFO is set ( #693 )
...
Co-authored-by: Brian Murphy <brm@robotize.com>
2022-03-22 17:53:32 -05:00
Stefan Kerkmann
bc3484e793
Mark __aeabi_lmul section as allocatable and executable ( #722 )
...
When using a linker script which does not provide a .time_critical.
section that is marked "ax" and wrongly define
PICO_INT64_OPS_IN_RAM=1 this would generate a malformed
executable with strange runtime bugs in the worst case.
2022-03-22 17:51:24 -05:00
Andrew Scheller
b7e82b638a
Fix function-names reported by hardware_pwm_test ( #736 )
2022-03-22 17:49:17 -05:00
Andrew Scheller
bf9848eaf9
Updated DMA CTRL_TRIG.CHAIN_TO reset values ( #743 )
2022-03-04 16:47:41 -06:00
Akiyuki Okayasu
ae7ef546a6
Fix typo in Doxygen comment ( #731 )
2022-02-14 12:03:47 -06:00
Stephen Robinson
b3cf3e8f6f
Correct comment in time.h ( #715 )
...
There was `microseconds` written where there should have been `milliseconds`.
Co-authored-by: Stephen <stephen@drsudo.com>
2022-01-22 19:57:47 -06:00
bobsayshilol
25a3b36793
Fix assert in adc_set_round_robin() ( #698 )
...
The mask passed in shouldn't already be shifted by ADC_CS_RROBIN_LSB
(16) otherwise the shift in the call to hw_write_masked() would shift
all of the bits off the end of the mask, hence we should be asserting
not against ADC_CS_RROBIN_BITS (0x1f0000) but against the number of ADC
channels available.
2022-01-19 09:34:18 -06:00
Daniel KJ
96afce8ece
Add board definition for Adafruit Macropad ( #684 )
...
* added board header for adafruit macropad rp2040
Co-authored-by: Daniel Kenyon-Jones <mail@dlkj.co.uk>
2022-01-19 09:32:17 -06:00
Andrew Scheller
5bcf4ed83a
Clarify header-comments about pico_enable_stdio_ CMake-functions ( #705 )
2022-01-19 09:30:21 -06:00
arturo182
e379f6764b
Add board definition for RP2040 Stamp and Carrier ( #696 )
2022-01-19 09:26:54 -06:00
Jonathan Reichelt Gjertsen
91462e430a
Add __attribute__((noreturn)) to _exit ( #707 )
...
Fixes the following compiler warning
```
.../vendor/pico-sdk/src/rp2_common/pico_runtime/runtime.c: In function 'panic':
.../pico-sdk/src/rp2_common/pico_runtime/runtime.c:284:1: warning: 'noreturn' function does return
284 | }
| ^
```
2022-01-19 09:25:40 -06:00
Michael Olson
d831eff5a2
fix pioasm python output ( #694 ) ( #695 )
...
Issue:
irq wait 0
irq 0
are translated as:
irq(wait, 0) # 0
irq(nowait, 0) # 1
wait/nowait are incorrect, should be block or ommited (alt: noblock).
After change:
irq(block, 0) # 0
irq(0) # 1
2022-01-08 13:55:23 -06:00
Thomas Fike
215f77b836
Moves the #if guards to before the comments ( #690 )
...
Fixes #683
2022-01-08 13:53:21 -06:00
David Shadoff
0f67a6c00c
Add board definition for Adafruit KB2040 ( #676 )
2021-12-13 09:45:29 -06:00
Graham Sanderson
add120e4f6
add missing change to dma.h from __force_inline fix ( #680 )
2021-12-08 12:32:09 -06:00
ZodiusInfuser
386e2a7bc6
Added Tiny2040 2MB ( #672 )
2021-12-08 12:06:53 -06:00
Graham Sanderson
0562089fab
fixup __forceinline for cpp code and add kitchen_sink cpp test ( #670 )
...
* fix __force_inline for different GCC versions in cpp mode (the affected versions are different from c mode), and build kitchsink.c as a cpp file too for testing
* silly bug in host platform.h
2021-12-08 12:05:49 -06:00
Andrew Scheller
269332dc21
rename pybstick26_rp2040.h to garatronic_pybstick26_rp2040.h ( #675 )
2021-12-06 11:37:24 -06:00
