6390fe56ae
use _u(0x800) insteand of 0x800u in platform_defs which is included by assembler
2021-03-03 15:43:46 +00:00
14b5ea39cd
Previous change didn't allow CI checks to run when an external fork PRs to raspberrypi
2021-03-03 14:58:38 +00:00
2592c59e74
Add SPI enums to Doxygen output, fixes #213 ( #216 )
...
Also fix a few typos
2021-03-03 08:51:17 -06:00
50acbb499d
Attempt to prevent workflows being triggered on forks
2021-03-03 14:43:11 +00:00
967cbc5c3d
Fixup PICO_CONFIG entries ( #208 )
...
* remove default=undefined
* fix a couple of typos / syntax "errors"
* perform even better default-value-checking in extract_configs.py
2021-03-02 15:37:46 -06:00
6a8167b5bb
Lots of Doxygen tweaks and fixes ( #212 )
...
* Add documentation for gpio_irq_callback_t and rtc_callback_t (fixes #175 )
* Hook up pico_binary_info and pico_bootsel_via_double_reset to the Doxygen index
* Add link to new Raspberry Pi Pico FAQ
* Consistently add parentheses for \sa or \see links to function-names
* Use consistent capitalisation for 'GitHub'
* Small typos and markup errors
2021-03-02 15:37:27 -06:00
1fb924a5ec
Remove PICO_SMPS_MODE_PIN from boards/vgaboard.h ( #209 )
...
...as it's already present in boards/pico.h
2021-03-02 11:20:21 -06:00
61978dc707
Rationalize board header pin defines, and add partner board headers ( #192 )
...
* Board definition header files for the iniital set of SparkFun rp2040 boards
* Add default PICO_DEFAULT_I2C*, allow no PICO_DEFAULT_LED_PIN, no PICO_DEFAULT_UART* (instead of -1)
Fixup SparkFun headers
* Pimoroni board headers
* Add LED related board defines PICO_CONFIGs (to pico_stdlib for now)
* more board config changes
* add Adafruit feather, itsybitsy, qtpy board headers
* add PICO_DEFAULT_WS2812_POWER_PIN define
* MOSI/MISO -> TX/RX, some UART cleanup.. make vgaboard.h defines take preference over pico.h ones
* local change to tinyusb to cope with no default LED or UART
* fix review issues
Co-authored-by: Kirk Benell <github-stuff@accvec.com >
Co-authored-by: ZodiusInfuser <christopher.parrott2@gmail.com >
Co-authored-by: hathach <thach@tinyusb.org >
2021-03-01 09:59:05 -06:00
429cca23ac
Add cmake build github action
2021-03-01 09:25:44 -06:00
d55d3a79bc
Typo
...
Set correct name in PICO_CONFIG line for PICO_STDIO_USB_ENABLE_RESET_VIA_VENDOR_INTERFACE
2021-03-01 09:25:09 -06:00
73751b89d1
Add support for resetting RP2040 via the USB connection when using pico_stdio_usb
...
- setting baud rate to magic value (default=1200) will cause a reset to BOOTSEL mode
- a VENDOR interface along side the CDC interface can be used to reset via refular flash boot, or into
BOOTSEL mode with control for the reset_usb_boot parameters for the latter
either method can be configured/enabled/disabled via #define
2021-03-01 08:36:29 -06:00
642b312fec
Add binary info 'feature' for pico_bootsel_via_double_reset
2021-03-01 08:36:09 -06:00
0b1de0a62e
hardware_rtc: make rtc_enable_alarm public
2021-03-01 08:36:09 -06:00
fa34820fb9
remove broken and fairly pointless deep sleep API ( #198 )
...
* remove broken and fairly pointless deep sleep API, use multicore_reset_core1 instead
* strict-prototype for multicore_fifo_drain() in host header
* Also for multicore_lockout_victim_init()
Co-authored-by: Luke Wren <wren6991@gmail.com >
2021-03-01 14:10:45 +00:00
265485c773
Fixup PICO_FLASH_SIZE_BYTES PICO_CONFIG entry (no default)
2021-02-27 12:09:02 -06:00
37dbe8862e
extract_configs: Do better matching-up of default values (regex was too strict)
...
also error if PICO_CONFIG says there's a default but no matching #define is found
2021-02-27 12:09:02 -06:00
a0481b2e02
Added ".syntax unified"
...
Otherwise gcc complains. I've tested this to work with the normal CMakeLists.txt provided in a few examples.
2021-02-27 12:07:57 -06:00
be7a655824
Replace unavailable flag-preserving instruction
...
It seems sub requires thumb2 instructions which are unavailable. This is in line with the rest of the sdk code base which uses subs.
2021-02-27 12:07:57 -06:00
f8015f266a
remove useless PICO_ALLOW_SLEED_IN_EXCEPTION
2021-02-26 08:52:14 -06:00
9fdf87f729
panic in debug mode if sleep methods are called in an exception handler (unless PICO_ALLOW_SLEEP_IN_EXCEPTION is set)
2021-02-26 08:52:14 -06:00
fb5a847026
Also check enum params and doxygenise pio_mov_status_type
2021-02-25 16:21:06 -06:00
3fb6a489f6
Extra param-checking for hardware_pio library (switch asserts to valid_params_if, and add additional checks)
2021-02-25 16:21:06 -06:00
5a245d549a
Add some "\ingroup timestamp" doxy-comments so that they actually appear in the output!
2021-02-25 16:20:20 -06:00
1281fbe9fa
Remove duplicate PARAM_ASSERTIONS_ENABLED_SYNC PICO_CONFIG entry
2021-02-25 16:19:38 -06:00
3110843159
Pico flash size bytes ( #159 )
...
* Move PICO_FLASH_SIZE_BYTES out of platform_defs.h since it precedes board config; also default to -1 for unknown
* make default for PICO_FLASH_SIZE_BYTES undefined - i.e. no value
2021-02-25 11:01:01 -06:00
693311a74d
fix compiler warning
2021-02-25 10:43:28 -06:00
75422bbd68
host mode fixups
2021-02-25 10:16:40 -06:00
72307e99dc
pio: improve (slightly) error message for claim failure on PIO 1
2021-02-25 10:16:40 -06:00
24e6668b35
move test cases after PICO_SDK_POST_LIDR_DIRS inclusion, so pico-host-sdl can be used
2021-02-25 10:16:40 -06:00
760cb59c97
cmake: change warning message for unititialized TinyUSB
2021-02-25 10:16:40 -06:00
cf3182021a
%g should not print 0 as infe-308 ( #185 )
2021-02-25 10:00:05 -06:00
036d90d8cf
Default PARAM_ASSERTIONS_ENABLED_LOCK_CORE to 0 ( #184 )
...
so that it matches all the other PARAM_ASSERTIONS_* default values
2021-02-25 09:52:21 -06:00
cf383d484f
Add 'hardware/structs/sio.h' header to the 'pico/multicore.h' header\n\nThe pico/multicore.h header uses the sio_hw struct, but does not include the header that defines it. This normally is not a problem since other headers include the structure as well, but since this structure is used in the header, we should not rely on other headers bringing it in and instead include it directly ( #176 )
2021-02-25 08:41:51 -06:00
d3aa6f7f98
No malloc for default alarm pool an pheap docs/cleanup ( #143 )
...
* Statically allocate the default timer pool (to avoid pulling in malloc); doxygen for pheap (and some function name changes)
* fix comments
2021-02-25 08:40:03 -06:00
d7ed2aeaa3
re-arrange pico/types.h to avoid duplicate doxygen
2021-02-25 08:28:17 -06:00
096b65d8db
fix comment
2021-02-25 08:28:17 -06:00
db6cc12027
fix the represntation of at_the_end_of_time to be 63 one bits rather than 32
2021-02-25 08:28:17 -06:00
8ebe036665
Change _U to _u as _U exists in ctype.h
2021-02-25 08:26:16 -06:00
41c0e9f3b9
Fixup another level of compiler warnings, add _U() definition
2021-02-25 08:26:16 -06:00
be13f591d0
Explicitly mark constants in autogenerated headers as unsigned values
2021-02-25 08:26:16 -06:00
45b39d067b
b0 sincos shim was incorrect, causing crash
2021-02-24 17:15:40 -06:00
63ff3483d5
elf2uf2: fix address range bug
2021-02-22 18:52:43 -06:00
e3925f5864
elf2uf2: fix breakage for no_flash builds; removep 0xFFFFFFFF constantds and error messsage
2021-02-19 14:23:24 -06:00
eae2006f79
elf2uf2: determine entry address selected by Boot ROM (Plan B)
2021-02-19 14:05:11 -06:00
07e3387458
elf2uf2: determine entry address selected by Boot ROM
2021-02-19 14:05:11 -06:00
1478c6b89f
Bunch of small fixes ( #154 )
...
* use valid_params_if macro for lock assertion
* fixup param checking in pwm.h
* Fix range of fractional divider parameter check in pwm.h
Co-authored-by: Luke Wren <wren6991@gmail.com >
2021-02-19 14:15:29 +00:00
3f0529a25c
Add more memory barriers to avoid code re-ordering issues with DMA ( #155 )
...
* Add more memory barriers to avoid code re-ordering issues with DMA
* Comment typos
* Fix Wstrict-prototype on __compiler_memory_barrier
* Remove now-redundant __compiler_barrier macro from hardware_flash
Co-authored-by: Luke Wren <wren6991@gmail.com >
2021-02-19 13:11:56 +00:00
e349dbbf4f
add boot2 info to binary info
2021-02-19 12:32:38 +00:00
a498b888b2
pioasm: Ada output format
2021-02-18 18:42:19 -06:00
9fbfa1fcbc
REAMDE.md improvements
...
Fix the order of the steps (fixes #133 ) and make it clearer that step 2 is choose-just-one-option
2021-02-18 11:39:11 -06:00
