Andrew Scheller
50acbb499d
Attempt to prevent workflows being triggered on forks
2021-03-03 14:43:11 +00:00
Andrew Scheller
967cbc5c3d
Fixup PICO_CONFIG entries ( #208 )
...
* remove default=undefined
* fix a couple of typos / syntax "errors"
* perform even better default-value-checking in extract_configs.py
2021-03-02 15:37:46 -06:00
Andrew Scheller
6a8167b5bb
Lots of Doxygen tweaks and fixes ( #212 )
...
* Add documentation for gpio_irq_callback_t and rtc_callback_t (fixes #175 )
* Hook up pico_binary_info and pico_bootsel_via_double_reset to the Doxygen index
* Add link to new Raspberry Pi Pico FAQ
* Consistently add parentheses for \sa or \see links to function-names
* Use consistent capitalisation for 'GitHub'
* Small typos and markup errors
2021-03-02 15:37:27 -06:00
Andrew Scheller
1fb924a5ec
Remove PICO_SMPS_MODE_PIN from boards/vgaboard.h ( #209 )
...
...as it's already present in boards/pico.h
2021-03-02 11:20:21 -06:00
Graham Sanderson
61978dc707
Rationalize board header pin defines, and add partner board headers ( #192 )
...
* Board definition header files for the iniital set of SparkFun rp2040 boards
* Add default PICO_DEFAULT_I2C*, allow no PICO_DEFAULT_LED_PIN, no PICO_DEFAULT_UART* (instead of -1)
Fixup SparkFun headers
* Pimoroni board headers
* Add LED related board defines PICO_CONFIGs (to pico_stdlib for now)
* more board config changes
* add Adafruit feather, itsybitsy, qtpy board headers
* add PICO_DEFAULT_WS2812_POWER_PIN define
* MOSI/MISO -> TX/RX, some UART cleanup.. make vgaboard.h defines take preference over pico.h ones
* local change to tinyusb to cope with no default LED or UART
* fix review issues
Co-authored-by: Kirk Benell <github-stuff@accvec.com>
Co-authored-by: ZodiusInfuser <christopher.parrott2@gmail.com>
Co-authored-by: hathach <thach@tinyusb.org>
2021-03-01 09:59:05 -06:00
Liam Fraser
429cca23ac
Add cmake build github action
2021-03-01 09:25:44 -06:00
Andrew Scheller
d55d3a79bc
Typo
...
Set correct name in PICO_CONFIG line for PICO_STDIO_USB_ENABLE_RESET_VIA_VENDOR_INTERFACE
2021-03-01 09:25:09 -06:00
graham sanderson
73751b89d1
Add support for resetting RP2040 via the USB connection when using pico_stdio_usb
...
- setting baud rate to magic value (default=1200) will cause a reset to BOOTSEL mode
- a VENDOR interface along side the CDC interface can be used to reset via refular flash boot, or into
BOOTSEL mode with control for the reset_usb_boot parameters for the latter
either method can be configured/enabled/disabled via #define
2021-03-01 08:36:29 -06:00
graham sanderson
642b312fec
Add binary info 'feature' for pico_bootsel_via_double_reset
2021-03-01 08:36:09 -06:00
graham sanderson
0b1de0a62e
hardware_rtc: make rtc_enable_alarm public
2021-03-01 08:36:09 -06:00
Graham Sanderson
fa34820fb9
remove broken and fairly pointless deep sleep API ( #198 )
...
* remove broken and fairly pointless deep sleep API, use multicore_reset_core1 instead
* strict-prototype for multicore_fifo_drain() in host header
* Also for multicore_lockout_victim_init()
Co-authored-by: Luke Wren <wren6991@gmail.com>
2021-03-01 14:10:45 +00:00
Andrew Scheller
265485c773
Fixup PICO_FLASH_SIZE_BYTES PICO_CONFIG entry (no default)
2021-02-27 12:09:02 -06:00
Andrew Scheller
37dbe8862e
extract_configs: Do better matching-up of default values (regex was too strict)
...
also error if PICO_CONFIG says there's a default but no matching #define is found
2021-02-27 12:09:02 -06:00
foopub
a0481b2e02
Added ".syntax unified"
...
Otherwise gcc complains. I've tested this to work with the normal CMakeLists.txt provided in a few examples.
2021-02-27 12:07:57 -06:00
foopub
be7a655824
Replace unavailable flag-preserving instruction
...
It seems sub requires thumb2 instructions which are unavailable. This is in line with the rest of the sdk code base which uses subs.
2021-02-27 12:07:57 -06:00
graham sanderson
f8015f266a
remove useless PICO_ALLOW_SLEED_IN_EXCEPTION
2021-02-26 08:52:14 -06:00
graham sanderson
9fdf87f729
panic in debug mode if sleep methods are called in an exception handler (unless PICO_ALLOW_SLEEP_IN_EXCEPTION is set)
2021-02-26 08:52:14 -06:00
Andrew Scheller
fb5a847026
Also check enum params and doxygenise pio_mov_status_type
2021-02-25 16:21:06 -06:00
Andrew Scheller
3fb6a489f6
Extra param-checking for hardware_pio library (switch asserts to valid_params_if, and add additional checks)
2021-02-25 16:21:06 -06:00
Andrew Scheller
5a245d549a
Add some "\ingroup timestamp" doxy-comments so that they actually appear in the output!
2021-02-25 16:20:20 -06:00
Andrew Scheller
1281fbe9fa
Remove duplicate PARAM_ASSERTIONS_ENABLED_SYNC PICO_CONFIG entry
2021-02-25 16:19:38 -06:00
Graham Sanderson
3110843159
Pico flash size bytes ( #159 )
...
* Move PICO_FLASH_SIZE_BYTES out of platform_defs.h since it precedes board config; also default to -1 for unknown
* make default for PICO_FLASH_SIZE_BYTES undefined - i.e. no value
2021-02-25 11:01:01 -06:00
graham sanderson
693311a74d
fix compiler warning
2021-02-25 10:43:28 -06:00
graham sanderson
75422bbd68
host mode fixups
2021-02-25 10:16:40 -06:00
graham sanderson
72307e99dc
pio: improve (slightly) error message for claim failure on PIO 1
2021-02-25 10:16:40 -06:00
graham sanderson
24e6668b35
move test cases after PICO_SDK_POST_LIDR_DIRS inclusion, so pico-host-sdl can be used
2021-02-25 10:16:40 -06:00
graham sanderson
760cb59c97
cmake: change warning message for unititialized TinyUSB
2021-02-25 10:16:40 -06:00
Graham Sanderson
cf3182021a
%g should not print 0 as infe-308 ( #185 )
2021-02-25 10:00:05 -06:00
Andrew Scheller
036d90d8cf
Default PARAM_ASSERTIONS_ENABLED_LOCK_CORE to 0 ( #184 )
...
so that it matches all the other PARAM_ASSERTIONS_* default values
2021-02-25 09:52:21 -06:00
Zachary Kohnen
cf383d484f
Add 'hardware/structs/sio.h' header to the 'pico/multicore.h' header\n\nThe pico/multicore.h
header uses the sio_hw
struct, but does not include the header that defines it. This normally is not a problem since other headers include the structure as well, but since this structure is used in the header, we should not rely on other headers bringing it in and instead include it directly ( #176 )
2021-02-25 08:41:51 -06:00
Graham Sanderson
d3aa6f7f98
No malloc for default alarm pool an pheap docs/cleanup ( #143 )
...
* Statically allocate the default timer pool (to avoid pulling in malloc); doxygen for pheap (and some function name changes)
* fix comments
2021-02-25 08:40:03 -06:00
graham sanderson
d7ed2aeaa3
re-arrange pico/types.h to avoid duplicate doxygen
2021-02-25 08:28:17 -06:00
graham sanderson
096b65d8db
fix comment
2021-02-25 08:28:17 -06:00
graham sanderson
db6cc12027
fix the represntation of at_the_end_of_time to be 63 one bits rather than 32
2021-02-25 08:28:17 -06:00
graham sanderson
8ebe036665
Change _U to _u as _U exists in ctype.h
2021-02-25 08:26:16 -06:00
graham sanderson
41c0e9f3b9
Fixup another level of compiler warnings, add _U() definition
2021-02-25 08:26:16 -06:00
Andrew Scheller
be13f591d0
Explicitly mark constants in autogenerated headers as unsigned values
2021-02-25 08:26:16 -06:00
graham sanderson
45b39d067b
b0 sincos shim was incorrect, causing crash
2021-02-24 17:15:40 -06:00
Peter Lawrence
63ff3483d5
elf2uf2: fix address range bug
2021-02-22 18:52:43 -06:00
graham sanderson
e3925f5864
elf2uf2: fix breakage for no_flash builds; removep 0xFFFFFFFF constantds and error messsage
2021-02-19 14:23:24 -06:00
Peter Lawrence
eae2006f79
elf2uf2: determine entry address selected by Boot ROM (Plan B)
2021-02-19 14:05:11 -06:00
Peter Lawrence
07e3387458
elf2uf2: determine entry address selected by Boot ROM
2021-02-19 14:05:11 -06:00
Graham Sanderson
1478c6b89f
Bunch of small fixes ( #154 )
...
* use valid_params_if macro for lock assertion
* fixup param checking in pwm.h
* Fix range of fractional divider parameter check in pwm.h
Co-authored-by: Luke Wren <wren6991@gmail.com>
2021-02-19 14:15:29 +00:00
Graham Sanderson
3f0529a25c
Add more memory barriers to avoid code re-ordering issues with DMA ( #155 )
...
* Add more memory barriers to avoid code re-ordering issues with DMA
* Comment typos
* Fix Wstrict-prototype on __compiler_memory_barrier
* Remove now-redundant __compiler_barrier macro from hardware_flash
Co-authored-by: Luke Wren <wren6991@gmail.com>
2021-02-19 13:11:56 +00:00
graham sanderson
e349dbbf4f
add boot2 info to binary info
2021-02-19 12:32:38 +00:00
Jeremy Grosser
a498b888b2
pioasm: Ada output format
2021-02-18 18:42:19 -06:00
Andrew Scheller
9fbfa1fcbc
REAMDE.md improvements
...
Fix the order of the steps (fixes #133 ) and make it clearer that step 2 is choose-just-one-option
2021-02-18 11:39:11 -06:00
Luke Wren
2fa84c7743
Missing comma in pioasm python wait output
2021-02-18 11:38:21 -06:00
Luke Wren
4c1fac58d3
Add pico_bootsel_via_double_reset library, fix #87 ( #137 )
...
* Add pico_bootsel_via_double_reset library, fix #87
* pico_bootsel_via_double_reset: remove unnecessary library guard, fix subdirectory ordering
* Fix C type used as PICO_CONFIG type
2021-02-18 16:12:22 +00:00
Graham Sanderson
6b0f736d3b
fixup not/reverse for pioasm python output ( #146 )
2021-02-18 16:04:06 +00:00