0d2591e1f1
Pad all but last sector in flash binary to write whole of sector ( #800 )
2022-05-10 13:03:44 -05:00
81bdcb6681
print build type during CMake config; remove spurious call to pico_is_toplevel_project() ( #818 )
2022-05-10 13:00:22 -05:00
9c616da1e5
fix bug in pico_float_test ( #817 )
2022-05-10 12:58:55 -05:00
f260477802
Adapt assembler syntax to eliminate Clang errors. (LLVM 14.0.0) ( #798 )
...
Co-authored-by: jeremyd <>
2022-05-09 15:11:59 -05:00
e1c5fd34e4
PLL setup check bug ( #796 ) ( #806 )
2022-05-09 14:52:38 -05:00
5d422deed1
Add extra info about address_range defined values ( #652 )
2022-05-04 16:36:21 -05:00
0c501c246a
Add wiznet_w5100s_evb_pico support ( #666 )
2022-05-04 16:35:06 -05:00
259da19660
Include structs/iobank0.h from hardware/gpio.h ( #733 ) ( #807 )
2022-05-04 16:34:11 -05:00
5325008956
Added board definition for upcoming Pimoroni motor driver ( #795 )
2022-05-04 16:21:30 -05:00
510ca47c92
Additional PWM validation and small tidy-up ( #801 )
...
See #768 for discussion / inspiration
2022-05-04 15:29:26 -05:00
d5121dc880
Removed unnecessary ifdefs from Pimoroni boards ( #802 )
...
* Removed unnecessary ifdefs from Pim boards
* Re-ordered some pins
2022-05-04 15:26:55 -05:00
3c450011da
Additional param-validation for PIO ( #805 )
...
The RP2040 datasheet says "If INT is 0, FRAC must also be 0."
2022-05-04 15:25:43 -05:00
6149b9e4ec
Add board definition for Seeed Xiao RP2040 ( #691 )
...
* Add board definition for Seeed Xiao RP2040
https://www.seeedstudio.com/XIAO-RP2040-v1-0-p-5026.html
https://wiki.seeedstudio.com/XIAO-RP2040/
2022-05-03 12:40:40 -05:00
8554fc4ea1
Add is_at_the_end_of_time() method ( #784 )
2022-05-03 11:55:01 -05:00
01290c4cb3
Added int_frac function for configuring PWM ( #768 )
2022-05-03 11:54:46 -05:00
8d43364cfb
Small typos ( #776 )
2022-05-03 11:47:48 -05:00
1c9f72ba1c
Small edits to the Doxygen mainpage and update the RPi logo ( #778 )
2022-05-03 11:47:18 -05:00
76c1830aeb
Add gpio_deinit ( #793 )
2022-05-03 11:46:27 -05:00
c66a2c1c3b
Remove implicit grouping for PIO defines ( #779 )
2022-05-03 11:46:10 -05:00
e4a2aa7262
Fix typo in binary_info description ( #788 )
2022-05-03 11:43:42 -05:00
fc86203f49
comment typo ( #794 )
2022-05-03 11:41:10 -05:00
6619a2d329
Typo ( #799 )
...
Remove superfluous apostrophes in Doxygen comments
2022-05-03 11:34:46 -05:00
5a427fbf1f
irq_add_shared_handler assertion fix #724 ( #747 )
2022-04-29 14:34:20 -05:00
bb5a2a3906
Added definition for Badger RP2040 board ( #735 )
2022-04-04 16:10:32 -05:00
8291f1013a
add #ifdef guards to vgaboard.h to allow user overrides ( #746 )
2022-04-04 16:08:53 -05:00
e90f831756
add board definition of eetree gamekit rp2040 ( #732 )
2022-04-04 16:08:30 -05:00
541f93541c
improve comment ( #658 )
2022-04-04 16:08:12 -05:00
17d53af105
Allow 252-byte binaries to be checksummed ( #764 )
...
Fixes #740
2022-04-04 15:46:34 -05:00
1896b1491b
fix __ctzdi2 for values with non-zero low 32 bits ( fixes #765 ) ( #766 )
2022-04-04 15:45:01 -05:00
3d45276423
Added board definition for upcoming Pimoroni servo driver ( #769 )
2022-04-04 15:31:52 -05:00
d35083b3f7
Fix typo in SIO register description ( #770 )
2022-04-04 15:30:13 -05:00
38b26b5d65
pico_sdk_import: don't recurse git submodules ( #772 )
...
When cloning the pico-sdk repo manually, one normally would do `git
submodule update --init`, which is non-recursive. However, when cloning
automatically, CMake will recursively update submodules by default.
Updating all of tiny-usb's submodules takes an extremely long time.
Luckily, CMake 3.17 added an option we can specify for FetchContent to
tell it not to recursively update submodules. On older CMake versions,
the flag is not used. For those with a new enough version of CMake, this
will significantly speed up SDK cloning.
Fixes #771 .
2022-04-04 15:29:33 -05:00
d54104a1e5
fix when PICO_NO_BINARY_INFO is set ( #693 )
...
Co-authored-by: Brian Murphy <brm@robotize.com >
2022-03-22 17:53:32 -05:00
bc3484e793
Mark __aeabi_lmul section as allocatable and executable ( #722 )
...
When using a linker script which does not provide a .time_critical.
section that is marked "ax" and wrongly define
PICO_INT64_OPS_IN_RAM=1 this would generate a malformed
executable with strange runtime bugs in the worst case.
2022-03-22 17:51:24 -05:00
b7e82b638a
Fix function-names reported by hardware_pwm_test ( #736 )
2022-03-22 17:49:17 -05:00
bf9848eaf9
Updated DMA CTRL_TRIG.CHAIN_TO reset values ( #743 )
2022-03-04 16:47:41 -06:00
ae7ef546a6
Fix typo in Doxygen comment ( #731 )
2022-02-14 12:03:47 -06:00
b3cf3e8f6f
Correct comment in time.h ( #715 )
...
There was `microseconds` written where there should have been `milliseconds`.
Co-authored-by: Stephen <stephen@drsudo.com >
2022-01-22 19:57:47 -06:00
25a3b36793
Fix assert in adc_set_round_robin() ( #698 )
...
The mask passed in shouldn't already be shifted by ADC_CS_RROBIN_LSB
(16) otherwise the shift in the call to hw_write_masked() would shift
all of the bits off the end of the mask, hence we should be asserting
not against ADC_CS_RROBIN_BITS (0x1f0000) but against the number of ADC
channels available.
2022-01-19 09:34:18 -06:00
96afce8ece
Add board definition for Adafruit Macropad ( #684 )
...
* added board header for adafruit macropad rp2040
Co-authored-by: Daniel Kenyon-Jones <mail@dlkj.co.uk >
2022-01-19 09:32:17 -06:00
5bcf4ed83a
Clarify header-comments about pico_enable_stdio_ CMake-functions ( #705 )
2022-01-19 09:30:21 -06:00
e379f6764b
Add board definition for RP2040 Stamp and Carrier ( #696 )
2022-01-19 09:26:54 -06:00
91462e430a
Add __attribute__((noreturn)) to _exit ( #707 )
...
Fixes the following compiler warning
```
.../vendor/pico-sdk/src/rp2_common/pico_runtime/runtime.c: In function 'panic':
.../pico-sdk/src/rp2_common/pico_runtime/runtime.c:284:1: warning: 'noreturn' function does return
284 | }
| ^
```
2022-01-19 09:25:40 -06:00
d831eff5a2
fix pioasm python output ( #694 ) ( #695 )
...
Issue:
irq wait 0
irq 0
are translated as:
irq(wait, 0) # 0
irq(nowait, 0) # 1
wait/nowait are incorrect, should be block or ommited (alt: noblock).
After change:
irq(block, 0) # 0
irq(0) # 1
2022-01-08 13:55:23 -06:00
215f77b836
Moves the #if guards to before the comments ( #690 )
...
Fixes #683
2022-01-08 13:53:21 -06:00
0f67a6c00c
Add board definition for Adafruit KB2040 ( #676 )
2021-12-13 09:45:29 -06:00
add120e4f6
add missing change to dma.h from __force_inline fix ( #680 )
2021-12-08 12:32:09 -06:00
386e2a7bc6
Added Tiny2040 2MB ( #672 )
2021-12-08 12:06:53 -06:00
0562089fab
fixup __forceinline for cpp code and add kitchen_sink cpp test ( #670 )
...
* fix __force_inline for different GCC versions in cpp mode (the affected versions are different from c mode), and build kitchsink.c as a cpp file too for testing
* silly bug in host platform.h
2021-12-08 12:05:49 -06:00
269332dc21
rename pybstick26_rp2040.h to garatronic_pybstick26_rp2040.h ( #675 )
2021-12-06 11:37:24 -06:00
