f3ee2f311c
Modify extract_configs.py to deal with _u(X) macros ( #222 )
2021-03-04 21:22:48 -06:00
6770bd2a46
use _u(0x800) insteand of 0x800u in platform_defs which is included by assembler
2021-03-04 21:22:48 -06:00
549eec6568
Previous change didn't allow CI checks to run when an external fork PRs to raspberrypi
2021-03-04 21:22:48 -06:00
1a2bb7c219
Add SPI enums to Doxygen output, fixes #213 ( #216 )
...
Also fix a few typos
2021-03-04 21:22:48 -06:00
0755674cc4
Attempt to prevent workflows being triggered on forks
2021-03-04 21:22:48 -06:00
1413a4f470
Fixup PICO_CONFIG entries ( #208 )
...
* remove default=undefined
* fix a couple of typos / syntax "errors"
* perform even better default-value-checking in extract_configs.py
2021-03-04 21:22:48 -06:00
fc17f880fd
Lots of Doxygen tweaks and fixes ( #212 )
...
* Add documentation for gpio_irq_callback_t and rtc_callback_t (fixes #175 )
* Hook up pico_binary_info and pico_bootsel_via_double_reset to the Doxygen index
* Add link to new Raspberry Pi Pico FAQ
* Consistently add parentheses for \sa or \see links to function-names
* Use consistent capitalisation for 'GitHub'
* Small typos and markup errors
2021-03-04 21:22:48 -06:00
b64cb686ae
Remove PICO_SMPS_MODE_PIN from boards/vgaboard.h ( #209 )
...
...as it's already present in boards/pico.h
2021-03-04 21:22:48 -06:00
7ee36e3328
Rationalize board header pin defines, and add partner board headers ( #192 )
...
* Board definition header files for the iniital set of SparkFun rp2040 boards
* Add default PICO_DEFAULT_I2C*, allow no PICO_DEFAULT_LED_PIN, no PICO_DEFAULT_UART* (instead of -1)
Fixup SparkFun headers
* Pimoroni board headers
* Add LED related board defines PICO_CONFIGs (to pico_stdlib for now)
* more board config changes
* add Adafruit feather, itsybitsy, qtpy board headers
* add PICO_DEFAULT_WS2812_POWER_PIN define
* MOSI/MISO -> TX/RX, some UART cleanup.. make vgaboard.h defines take preference over pico.h ones
* local change to tinyusb to cope with no default LED or UART
* fix review issues
Co-authored-by: Kirk Benell <github-stuff@accvec.com >
Co-authored-by: ZodiusInfuser <christopher.parrott2@gmail.com >
Co-authored-by: hathach <thach@tinyusb.org >
2021-03-04 21:22:48 -06:00
839224c2a3
Add cmake build github action
2021-03-04 21:22:48 -06:00
e870582e48
Typo
...
Set correct name in PICO_CONFIG line for PICO_STDIO_USB_ENABLE_RESET_VIA_VENDOR_INTERFACE
2021-03-04 21:22:48 -06:00
383e88ea16
Add support for resetting RP2040 via the USB connection when using pico_stdio_usb
...
- setting baud rate to magic value (default=1200) will cause a reset to BOOTSEL mode
- a VENDOR interface along side the CDC interface can be used to reset via refular flash boot, or into
BOOTSEL mode with control for the reset_usb_boot parameters for the latter
either method can be configured/enabled/disabled via #define
2021-03-04 21:22:48 -06:00
61e46fefe5
Add binary info 'feature' for pico_bootsel_via_double_reset
2021-03-04 21:22:48 -06:00
8ada5fa7eb
hardware_rtc: make rtc_enable_alarm public
2021-03-04 21:22:48 -06:00
4904fe2e32
remove broken and fairly pointless deep sleep API ( #198 )
...
* remove broken and fairly pointless deep sleep API, use multicore_reset_core1 instead
* strict-prototype for multicore_fifo_drain() in host header
* Also for multicore_lockout_victim_init()
Co-authored-by: Luke Wren <wren6991@gmail.com >
2021-03-04 21:22:48 -06:00
f239bd3de5
Fixup PICO_FLASH_SIZE_BYTES PICO_CONFIG entry (no default)
2021-03-04 21:22:48 -06:00
a53b3a2ff0
extract_configs: Do better matching-up of default values (regex was too strict)
...
also error if PICO_CONFIG says there's a default but no matching #define is found
2021-03-04 21:22:48 -06:00
a989f4f6ee
Added ".syntax unified"
...
Otherwise gcc complains. I've tested this to work with the normal CMakeLists.txt provided in a few examples.
2021-03-04 21:22:48 -06:00
542b86e5db
Replace unavailable flag-preserving instruction
...
It seems sub requires thumb2 instructions which are unavailable. This is in line with the rest of the sdk code base which uses subs.
2021-03-04 21:22:48 -06:00
e371f6af60
remove useless PICO_ALLOW_SLEED_IN_EXCEPTION
2021-03-04 21:22:48 -06:00
aca685ceae
panic in debug mode if sleep methods are called in an exception handler (unless PICO_ALLOW_SLEEP_IN_EXCEPTION is set)
2021-03-04 21:22:48 -06:00
6b2c249961
Also check enum params and doxygenise pio_mov_status_type
2021-03-04 21:22:48 -06:00
786be7524a
Extra param-checking for hardware_pio library (switch asserts to valid_params_if, and add additional checks)
2021-03-04 21:22:48 -06:00
e5d61f1ad3
Add some "\ingroup timestamp" doxy-comments so that they actually appear in the output!
2021-03-04 21:22:48 -06:00
c1c7197757
Remove duplicate PARAM_ASSERTIONS_ENABLED_SYNC PICO_CONFIG entry
2021-03-04 21:22:48 -06:00
743dbabdec
Pico flash size bytes ( #159 )
...
* Move PICO_FLASH_SIZE_BYTES out of platform_defs.h since it precedes board config; also default to -1 for unknown
* make default for PICO_FLASH_SIZE_BYTES undefined - i.e. no value
2021-03-04 21:22:48 -06:00
0d789c9b54
fix compiler warning
2021-03-04 21:22:48 -06:00
7ed5d87fb1
host mode fixups
2021-03-04 21:22:48 -06:00
3f5f5a1fd7
pio: improve (slightly) error message for claim failure on PIO 1
2021-03-04 21:22:48 -06:00
d652f71e1b
move test cases after PICO_SDK_POST_LIDR_DIRS inclusion, so pico-host-sdl can be used
2021-03-04 21:22:48 -06:00
d3fa64afc8
cmake: change warning message for unititialized TinyUSB
2021-03-04 21:22:48 -06:00
e526e4f850
%g should not print 0 as infe-308 ( #185 )
2021-03-04 21:22:48 -06:00
4335268a93
Default PARAM_ASSERTIONS_ENABLED_LOCK_CORE to 0 ( #184 )
...
so that it matches all the other PARAM_ASSERTIONS_* default values
2021-03-04 21:22:48 -06:00
132d6df695
Add 'hardware/structs/sio.h' header to the 'pico/multicore.h' header\n\nThe pico/multicore.h header uses the sio_hw struct, but does not include the header that defines it. This normally is not a problem since other headers include the structure as well, but since this structure is used in the header, we should not rely on other headers bringing it in and instead include it directly ( #176 )
2021-03-04 21:22:48 -06:00
e730e03e7f
No malloc for default alarm pool an pheap docs/cleanup ( #143 )
...
* Statically allocate the default timer pool (to avoid pulling in malloc); doxygen for pheap (and some function name changes)
* fix comments
2021-03-04 21:22:48 -06:00
0a22f704a6
re-arrange pico/types.h to avoid duplicate doxygen
2021-03-04 21:22:48 -06:00
228de60da0
fix comment
2021-03-04 21:22:48 -06:00
684986aae6
fix the represntation of at_the_end_of_time to be 63 one bits rather than 32
2021-03-04 21:22:48 -06:00
debef7471e
Change _U to _u as _U exists in ctype.h
2021-03-04 21:22:48 -06:00
503bc8b385
Fixup another level of compiler warnings, add _U() definition
2021-03-04 21:22:48 -06:00
7ded9df488
Explicitly mark constants in autogenerated headers as unsigned values
2021-03-04 21:22:48 -06:00
f16af45f9e
b0 sincos shim was incorrect, causing crash
2021-03-04 21:22:48 -06:00
173d63ef8d
elf2uf2: fix address range bug
2021-03-04 21:22:48 -06:00
1822d113d9
elf2uf2: fix breakage for no_flash builds; removep 0xFFFFFFFF constantds and error messsage
2021-03-04 21:22:48 -06:00
cfff23c5a3
elf2uf2: determine entry address selected by Boot ROM (Plan B)
2021-03-04 21:22:48 -06:00
ef030701c9
elf2uf2: determine entry address selected by Boot ROM
2021-03-04 21:22:48 -06:00
b53b0bac70
Bunch of small fixes ( #154 )
...
* use valid_params_if macro for lock assertion
* fixup param checking in pwm.h
* Fix range of fractional divider parameter check in pwm.h
Co-authored-by: Luke Wren <wren6991@gmail.com >
2021-03-04 21:22:48 -06:00
0732d0c2a3
Add more memory barriers to avoid code re-ordering issues with DMA ( #155 )
...
* Add more memory barriers to avoid code re-ordering issues with DMA
* Comment typos
* Fix Wstrict-prototype on __compiler_memory_barrier
* Remove now-redundant __compiler_barrier macro from hardware_flash
Co-authored-by: Luke Wren <wren6991@gmail.com >
2021-03-04 21:22:48 -06:00
4b7ffd71f0
add boot2 info to binary info
2021-03-04 21:22:48 -06:00
4639e75d0d
pioasm: Ada output format
2021-03-04 21:22:48 -06:00
